Rockwell Automation 1756-EN2TXT ControlLogix-XT EtherNet/IP Bridge Module - Manual

Installation Instructions
ControlLogix-XT EtherNet/IP Bridge Module
Catalog Number 1756-EN2TXT
Topic Page
Important User Information 2
About ControlLogix-XT Systems 8
ControlLogix-XT with Traditional ControlLogix Components 8
Before You Begin 9
Determine Module Slot Location 9
Set the Network Address 10
Reset the Module to Initial Settings 11
Install the Module 12
Connect the Module to the EtherNet/IP Network 13
Connect to the Module Via the USB Port 14
Components Required for USB Connection 14
Connect the USB Cable 14
Apply Chassis Power 15
Check Power Supply and Module Status 15
Alphanumeric Display Start-up Indications 16
Remove the Module 17
Status Indicators 18
General Specifications - 1756-EN2TXT 20
Environmental Specifications - 1756-EN2TXT 21
Certifications - 1756-EN2TXT 23
Additional Resources 24