Rockwell Automation 1734-8CFGDLX POINT I/O Module with 8 Configurable 24V DC Points and DeviceLogix IN - Manual (Page 24)

24 POINT I/O Module with 8 Configurable 24V DC Points and DeviceLogix
Publication 1734-IN039A-EN-P - March 2009
General Specifications
Attribute Value
Module location 1734-TB, 1734-TBS, 1734-TOP, and 1734-TOPS bases
POINTBus current, max 100 mA @ 5V DC
Power dissipation, max 2.6 W @ 28.8V DC
Thermal dissipation, max 8.9 BTU/hr @ 28.8V DC
Isolation voltage 50V (continuous), Reinforced Insulation Type
Type tested at 2121V DC for 60 s, field-side to system
No isolation between individual channels
Field power bus
Supply voltage, nom
Voltage range
24V DC
10…28.8V DC
Dimensions HxWxL, approx. 56 x 12 x 75.5 mm
2.2 x 0.47 x 2.97 in.
Terminal block screw torque Determined by installed terminal block
Keyswitch position 1
Reverse polarity protection Yes
Enclosure type rating None (open-style)
Wire size Determined by installed terminal block.
Wire category
1 - on signal ports
(1)
Pilot duty rating Not rated
(1)
Use this Conductor Category information for planning conductor routing. Refer to
Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1 .