Rockwell Automation 1747-ACNR15 ControlNet Adapter Module Installation Instructions User Manual
Page 17
ControlNet Adapter Module 17
Publication 1747-IN017C-EN-P - May 2001
The following information applies when operating this equipment in
hazardous locations:
Products marked “CL I, DIV 2, GP A, B, C, D” are suitable for use in Class I Division
2 Groups A, B, C, D, Hazardous Locations and nonhazardous locations only. Each
product is supplied with markings on the rating nameplate indicating the hazardous
location temperature code. When combining products within a system, the most
adverse temperature code (lowest “T” number) may be used to help determine the
overall temperature code of the system. Combinations of equipment in your system
are subject to investigation by the local Authority Having Jurisdiction at the time of
installation.
WARNING
!
EXPLOSION HAZARD
•
Do not disconnect equipment unless power
has been removed or the area is known to be
nonhazardous.
•
Do not disconnect connections to this
equipment unless power has been removed
or the area is known to be nonhazardous.
Secure any external connections that mate to
this equipment by using screws, sliding
latches, threaded connectors, or other means
provided with this product.
•
Substitution of components may impair
suitability for Class I, Division 2.
•
If this product contains batteries, they must
only be changed in an area known to be
nonhazardous.