Specifications – Rockwell Automation 1753-OW8 GuardPLC 8-Relay Output Module Installation Instructions User Manual
Page 11

GuardPLC Relay Output Module 11
Rockwell Automation Publication 1753-IN012C-EN-P - June 2010
Specifications
Technical Specifications - 1753-OW8
Attribute
1753-OW8
Interface: GuardPLC
Ethernet
2 x RJ45, 10/100BaseT (with 100 Mbps) with integrated switch
Operating voltage
24V DC, -15…20%, w
ss
≤
15%
Current consumption
0.6 A max (with max load)
Isolation voltage
•
250V (continuous), reinforced insulation type, relay contacts to Ethernet,
relay contacts to DC power, and relay to relay
•
50V (continuous), reinforced insulation type, Ethernet to DC power
•
Type-tested at 3250V DC for 60 s, relay contacts to Ethernet, relay contacts to
DC power, and relay to relay
•
Type-tested at 1000V DC for 60 s, Ethernet to DC power
Response time
≥
10 ms
Wiring category
(1)
Category 2 on communication ports, signal ports, and power ports
Wire size
•
I/O – 0.13…1.3 mm
2
(26…16 AWG) solid or stranded copper wire rated at
75 °C (167 °F) or greater with 1.2 mm (3/64 in.) insulation max
•
Power – 0.33…2.1 mm
2
(22…14 AWG) solid or stranded copper wire rated
at 75 °C (167 °F) or greater with 1.2 mm (3/64 in.) insulation max
•
Ethernet – RJ45 connector according to IEC 60603-7, 2 or 4 pair Category 5e
minimum cable according to TIA 568-B.1, or Category 5 cable according to
ISO/IEC 24702
Wire type
Shielded on Ethernet
Terminal block torque
0.51 N•m (4.5 lb•in)
Fuse (external)
24V DC power: 10 A (time-lag)
Battery backup
None
Enclosure type rating
Meets IP20
Width, approx.
207 mm (8.14 in.) including housing screws
Height, approx.
114 mm (4.49 in.) including latch
Depth, approx.
86 mm (3.38 in.) including grounding bolt
Weight, approx.
1.3 kg (3.47 lb)