Rockwell Automation 1784-KTCS ControlNET Scanner Installation Instructions - Manual (Page 3)

ControlNet Scanner Card 3
Publication 1784-5.35 – April 1999
Understanding the Application Software
The Allen-Bradley standard application programming interfaces (APIs) are
INTERCHANGE

, WINtelligent LINX

, IOLinx

, and RSLinx

software from
Rockwell Software, Inc. Contact your local Rockwell Automation sales
representative or distributor for further information.
Compliance to European Union Directives
If this product bears the
ПП
П
П П
П
П
marking, it is approved for installation within the
European Union and EEA regions. It has been designed and tested to meet the
following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC Electromagnetic
Compatibility (EMC) and the following standards, in whole or in part,
documented in a technical construction file:
•
EN 50081-2EMC - Generic Emission Standard, Part 2 - Industrial Environment
•
EN 50082-2EMC - Generic Immunity Standard, Part 2 - Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage, by
applying the safety requirements of EN 61131-2 Programmable Controllers,
Part 2 - Equipment Requirements and Tests.
For specific information required by EN 61131-2, see the appropriate sections in
the following Allen-Bradley publications:
•
Industrial Automation Wiring and Grounding Guidelines for Noise Immunity,
publication 1770-4.1
•
Automation Systems Catalog, publication B111