Rockwell Automation 1792D-CB18JP ArmorBlock MaXum I/O Cable Bases DeviceNet Powered Outputs Series B User Manual
Installation instructions
Publication 1792D-IN001B-EN-P - September 2000
Installation Instructions
ArmorBlock MaXum I/O Cable Bases
DeviceNet Powered Outputs Series B
(Cat. No. 1792D-CB12JP and -CB18JP)
This version of the ArmorBlock MaXum
™ cable base lets you provide
power to outputs using DeviceNet
™ power. No additional auxiliary
power cabling is needed. The ArmorBlock
MaXum Ι/Ο cable bases
mate with 4 or 8 connector modules, depending on your installation
requirements. No modification is required. Modules are
interchangeable with round media cable bases. This
interchangeability provides plug and play block upgrade capability
and easy field replacement. The completely assembled ArmorBlock
module and base requires no enclosure.
These instructions describe the installation of each cable base. The
catalog numbers for the cable bases are:
• 1792D-CB12JP for 12mm drop cable installation, see page 5
• 1792D-CB18JP for 18mm trunk or drop cable installation, see
page 6
42273
CB12JP
CB18JP
JP