Rockwell Automation 1771-OVN DC Output Mod. Installation Instructions - Manual (Page 13)

Specifications
(cont.)
DC (10–30V) Output Module 13
Publication 1771-IN036C-EN-P - July 2002
Emissions CISPR 11
Group 1, Class A (with appropriate enclosure)
Enclosure Type Rating None (open-style)
Keying Between 14 and16
Between 32 and34
Fuse Four 4.0A, 250V normal blow fuses (1 per group); SAN-O Corporation
ST4-4.0A
FieldWiring Arm Catalog Number 1771ĆWN
Wiring Arm Screw Torque 9 pound-inches (1.0Nm)
Certifications
(when product is marked)
UL UL ListedIndustrial Control Equipment
CSA CSA CertifiedProcess Control Equipment
CSA CSA CertifiedProcess Control Equipment for Class I,
Division 2 Group A, B, C, D Hazardous Locations
CE 3 European Union 89/336/EEC EMC Directive,
compliant with:
EN 61000-6-2, Industrial Immunity
EN 61000-6-4, Industrial Emissions
EN 50082-2, Industrial Immunity
EN 61326, Meas./Control/Lab., Industrial Requirements
C-Tick 3 Australian Radiocommunications Act, compliant with:
AS/NZS 2064, Industrial Emissions
1 14 gauge wire connectedto all terminals may not allow the cover on the fieldwiring arm to close. A smaller gauge wire may
be used.
2 You use this conductor category information for planning conductor routing as described in publication 1770Ć4.1, Industrial
Automation Wiring and Grounding Guidelines.
3 See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates and other certification details