Before you begin, Parts list – Rockwell Automation 1756-CN2R ControlLogix ControlNet Interface Module Series A Installation Instructions User Manual
Page 7

ControlLogix ControlNet Bridge Module 7
Publication
1756-IN602A-EN-P - November 2005
Before You Begin
Before you install the module, make sure you:
• know how to handle the module (see Preventing Electrostatic
Discharge).
• know the type of ControlNet network.
There are two types of scheduled traffic networks for
ControlNet: single-keeper networks and multi-keeper
networks. The 1756-CN2 and 1756-CN2R bridges are
multi-keeper capable.
You must match the keeper to the type of network. Refer to
the ControlNet Modules in Logix5000 Control Systems User
Manual, publication CNET-UM001, for more information.
Parts List
You need all of the components shown.
1756-CN2 or 1756-CN2R
1756-A4, 1756-A7, 1756-A10,
1756-A13, or 1756-A17
1756-PA72/75 or 1756-PB72/75
Power Supply
1786-TPR, -TPS
-TPYR, or -TPYS
(1)
(1)
1786-TPS or 1786-TPYS taps recommended for network connections.
1786-CP (Temporary
Network Connections)
Small Screwdriver
(Optional)