Rockwell Automation 1756-CN2R ControlLogix ControlNet Interface Module Series A Installation Instructions - Manual (Page 17)

ControlLogix ControlNet Bridge Module 17
Publication 1756-IN602A-EN-P - November 2005
• Use a 1770-KFC communication interface, a serial or parallel
connection, and a 1786-CP cable (pictured)
The 1786-CP cable can be plugged into any ControlNet product’s
network access port (NAP) to provide programming capability on the
ControlNet network. A programming terminal connected through this
cable is counted as a node and must have a unique network address.
ATTENTION
Use a 1786-CP
cable when connecting a
programming
terminal to the network through network access ports.
Using a commercially available RJ-style cable could result
in network failure.
1756-CN2R
1786-CP
(1)
ControlNet Link
Cable
1770-KFC
Serial or Parallel
Connections