General specifications – Rockwell Automation 1734-AENTR, Series B 1734 POINT I/O Dual Port EtherNet/IP Adapter Installation Instructions User Manual
Page 20
20 1734 POINT I/O Dual Port EtherNet/IP Adapter
Publication 1734-IN041B-EN-P - October 2013
Isolation voltage
50V (continuous), Reinforced Insulation Type, between
all
circuits
Type tested @ 500V AC for 60 s
Field power supply
10...28.8V DC @ 10A
Field power output
10...28.8V DC @ 9A
Module input
10...28V DC @ 1000 mA
POINTBus output, max
5V DC @ 0.8A
Dimensions (HxWxD), approx.
76.2 x 73.0 x 133.4 mm (3.0 x 2.87 x 5.25 in.)
Enclosure type rating
None (open-style)
Terminal base screw torque
0.8 Nm (7 lb-in)
Weight, approx.
0.28 Kg (0.62 lb)
Wiring category
(1)
1 – on power ports
1 – on communications ports
Wire Size
Power connections:
0.34... 2.1 mm
2
(22...14 AWG) solid or stranded copper wire rated
@ 75 °C (167 °F ) or greater, 1.2 mm (3/64 in.) insulation max or
90
°C (194 °F ) for ControlLogix.
Ethernet wiring:
RJ45 connector according to IEC 60603-7, 2 or 4 pair Category 5e
min cable according to TIA 568-B.1 or Category 5 cable according
to ISO/IEC 24702.
North American temp code
T4
IEC Temp Code
T4
(1)
Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and
Grounding Guidelines, publication
.
General Specifications
Attribute
Value