Rockwell Automation 1734-ADN, ADNX Point I/O DeviceNet Adapter Installation Instructions - Manual (Page 25)

POINT I/O DeviceNet Adapter 25
Publication 1734-IN026A-EN-P - April 2005
Isolation Voltage
(Continuous - Voltage
Withstand Rating) 50V continuous
Test to withstand 800V dc for 60s
Operating Voltage Range 10...28.8V dc
Wire Size
14 AWG (2.5mm
2
) - 22 AWG (0.25mm
2
) solid or stranded,
copper wire rated at 75
o
C or greater
3/64 inch (1.2mm) insulation maximum
Wire Category
1,2 1 on power ports
2 on communications ports
Wire Type Copper
Terminal Base Screw Torque 5-7 pound-inches (0.5-0.6Nm)
Field Wiring Terminations
DeviceNet 1 - Black Wire-V
2 - Blue WireCAN Low
3 - Bare WireShield
4 - White WireCAN High
5 - Red Wire+V
Power Supply 0 - No Connection
1 - No Connection
2 - Chassis Ground
3 - Chassis Ground
4 - Common
5 - Common
6 - Supply
7 - Supply