Compliance to european union directives, Emc directive, Low voltage directive – Rockwell Automation 1784-PCIDS DEVICENET PCI COMM User Manual
Page 5
5
Qiyvphvà &'#$" ñÃPpir à (((
&RPSOLDQFH WR (XURSHDQ
8QLRQ 'LUHFWLYHV
If this product has the
marking, it is approved
for installation within the European Union and
EEA regions. It has been designed and tested to
meet the following directives.
(0& 'LUHFWLYH
This product is tested to meet Council Directive
89/336/EEC Electromagnetic Compatibility
(EMC) and the following standards, in whole or in
part, documented in a technical construction file:
•
EN 50081-2 EMC - Generic Emission Standard,
Part 2 - Industrial Environment
•
EN 50082-2 EMC - Generic Immunity Standard,
Part 2 - Industrial Environment
This product is intended for use in an industrial
environment.
/RZ 9ROWDJH 'LUHFWLYH
This product is tested to meet Council Directive
73/23/EEC Low Voltage, by applying the safety
requirements of EN 61131-2 Programmable
Controllers, Part 2 - Equipment Requirements and
Tests.
For specific information required by EN 61131-2,
see the appropriate sections in this publication, as
well as the following Allen-Bradley publications:
•
Industrial Automation Wiring and Grounding
Guidelines for Noise Immunity, publication
1770-4.1
•
Automation Systems Catalog, publication B111
This equipment is classified as open equipment
and must be installed (mounted) in an enclosure
during operation as a means of providing safety
protection.
1784531_1099.fm Page 5 Friday, October 22, 1999 5:42 PM