Rockwell Automation 1738-ACNR ArmorPoint ControlNet Adapter, Series A - Manual

1 Publication 1738-IN016B-EN-E - March 2005
Installation Instructions
ArmorPoint ControlNet Adapter, Series A
Catalog Number 1738-ACNR
The ArmorPoint ControlNet adapter ships with the adapter and a
terminating base to be used with the last I/O module on the
backplane. The sealed IP67 housing of the adapter requires no
enclosure. (Note that environmental requirements other than IP67
may require an additional appropriate housing.) ControlNet
connectors are two redundant TNC style network connectors and one
mini style power connector. The ArmorPoint ControlNet adapter is
shown below.
ControlNet B
1738-ACNR
ControlNet A
X10
X1
Adapter
Status
PontBus
Status
ControlNet A
Status
ControlNet B
Status
System
Power
Adapter
Power
PWR
43792
TNC Style
Connectors
Auxiliary
Power
Connector
Node
Address
Switches