Rockwell Automation 1762-OW8 MICROLOGIX RELAY OUTPUT MODULE - Manual (Page 10)

10 MicroLogix 1762-OW8 Relay Output Module
Publication 1762-IN003B-EN-P - June 2013
I/O Memory Mapping
Output Data File
For each output module, the output data file contains the controller-directed state of the discrete
output points. Bit positions 0…7 correspond to output terminals 0…7.
w = write only, 0 = always at a 0 or OFF state
Addressing
The addressing scheme for 1762 Expansion I/O is shown below.
(1) I/O located on the controller (embedded I/O) is slot 0. I/O added to the controller (expansion I/O) begins with slot 1.
Wo
rd
Bit Position
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 0 w w w w w w w w
O0:x.0/0
Output
Data File
Slot Number (1)
Word (always zero for this module)
Bit (0 - 7)
Bit Delimiter
Word Delimiter
Slot Delimiter