Rockwell Automation 1769-OF4CI CompactLogix 1769-OF4CI Module - Manual (Page 6)

6 Compact 1769-OF4CI Isolated Analog Output Module
Rockwell Automation Publication 1769-IN075B-EN-P - August 2010
Module Installation
Compact I/O is suitable for use in an industrial environment when installed
in accordance with these instructions.
Prevent Electrostatic Discharge
Remove Power
ATTENTION: Electrostatic discharge can damage integrated
circuits or semiconductors if you touch bus connector pins or the
terminal block. Follow these guidelines when you handle the
module:
• Touch a grounded object to discharge static potential.
• Wear an approved wrist-strap grounding device.
• Do not touch the bus connector or connector pins.
• Do not touch circuit components inside the module.
• Use a static-safe work station, if available.
• When not in use, keep the module in its static-shield box.
ATTENTION: Remove power before removing or inserting this
module. When you remove or insert a module with power applied,
an electrical arc may occur. An electrical arc can cause personal
injury or property damage by:
• sending an erroneous signal to your system’s field devices,
causing unintended machine motion.
• causing an explosion in a hazardous environment.
Electrical arcing causes excessive wear to contacts on both the
module and its mating connector. Worn contacts may create electrical
resistance.