Rockwell Automation 1771-P4R_P6R Allen-Bradley Redundent Power Installation Instructions - Manual

Installation Instructions
Publication 1771-IN030B-EN-P - July 2002
AllenĆBradley Redundant
Power Supplies
Cat. No. 1771ĆP4R and 1771ĆP6R
This document provides you with the following information:
For this information See page
Important user information 1
What this package contains 4
Tasks on installing your power supply module 4
How to interpret indicators 13
Flow charts for troubleshooting your power supply module 15
Power supply specifications 20
Because of the variety of uses for the products described in this
publication, those responsible for the application and use of these
products must satisfy themselves that all necessary steps have been
taken to assure that each application and use meets all performance
and safety requirements, including any applicable laws, regulations,
codes and standards. In no event will Rockwell Automation be
responsible or liable for indirect or consequential damage resulting
from the use or application of these products.
Any illustrations, charts, sample programs, and layout examples
shown in this publication are intended solely for purposes of
example. Since there are many variables and requirements associated
with any particular installation, Rockwell Automation does not
assume responsibility or liability (to include intellectual property
liability) for actual use based upon the examples shown in this
publication.
Allen–Bradley publication SGI–1.1, Safety Guidelines for
Application, Installation, and Maintenance of Solid–State Control
(available from your local Rockwell Automation office), describes
some important differences between solid–state equipment and
electromechanical devices that should be taken into consideration
when applying products such as those described in this publication.
Reproduction of the contents of this copyrighted publication, in
whole or part, without written permission of Rockwell Automation,
is prohibited.
Important User Information
To the Installer