Rockwell Automation 1771-OC DC Output Driver Module Installation Instructions - Manual (Page 9)

DC Output Driver Module 9
Publication1771-IN076A-EN-P - October 2002
The module has eight neon status indicators (Figure 3) that show the
state of each output. These indicators light when their corresponding
outputs are energized.
The module also has an indicator that displays a blown–fuse
condition at the respective output regardless of the state of the
output. This indicator is driven by your field device power supply.
Figure 3
Status Indicators
Fuse Blown- lights whenany fuse inthe module blows.
Output 0
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Each indicator lights when its output is ON.
11886-I
Interpreting the Status
Indicators