Rockwell Automation 1771-OC DC Output Driver Module Installation Instructions - Manual (Page 8)

DC Output Driver Module 8
Publication 1771-IN076A-EN-P - October 2002
!
ATTENTION
Proper polarity, as indicated in the connection
diagram, must be observed with dc power
connections. Reverse polarity, or application of a
voltage outside the product ratings may cause
damage to the module.
You can use an output of the 1771–OC module to drive an input of a
DC (48V) input module (1771–IC) to indicate status, such as the
turning on a motor starter (Figure 2).
IMPORTANT
Use the same dc power source to power both
modules to ensure that ground is at the same
potential.
Figure 2
Using an Output Module to drive an Input Module
48V dc A
O
1
2
3
4
5
6
7
B
+dc A
O
1
2
3
4
5
6
7
B
dc Common
DC (48V) Output Module
1771-IC
DC (48V) Input Module
1771-OC
Output 0
Output 2
Output 1
Output 3
Output 5
Output 4
Output 7
Output 6
(Actual wiringruns in this direction.)