Before you begin, Rockwell automation technical support, Your questions or comments about this manual – Rockwell Automation 1757-SWKIT400 Getting Started with ProcessLogix R400.0 Quick Start User Manual
Page 3

Getting Started with ProcessLogix R400.0 3
Publication 1757-QS040A-EN-P - October 2001
Rockwell Automation Technical Support
If you need any assistance with the information found in this document, first call
your local Rockwell Automation representative, then:
•
Phone Support: (440) 646-5800
•
Web Support:
http://www.ab.com, under Support, click Product Support
Your Questions or Comments about this Manual
If you find a problem with this manual, please use the How are We Doing? form
located in the Documentation section of Knowledge Builder to notify us.
Before You Begin
Before you begin, read through and follow this checklist to organize and
implement your ProcessLogix R400.0 Software and Hardware installation.
Before you start the tasks in this Quick Start, ensure that you have already:
•
installed the chassis and power supply
•
installed the 1757-PLX52 Control Processor Module
•
installed the CNB module
•
installed the analog and digital I/O modules you want to use in your system
•
set up and configured the ProcessLogix Server
•
set up and configured the 1784-PCIC card
We explain how to do all of these tasks in the related manuals.
TIP
For details on installing ProcessLogix R400.0 software on a
ProcessLogix Server, refer to the ProcessLogix Installation and
Upgrade Guide, publication number 1757-IN040.