Configuring analog output modules, Configuring digital input modules – Rockwell Automation 1757-SWKIT400 Getting Started with ProcessLogix R400.0 Quick Start User Manual

Page 13

Getting Started with ProcessLogix R400.0 13

Publication 1757-QS040A-EN-P - October 2001

Configuring analog output modules

To configure an analog output module:

1. Double-click the IOM named LabAO.

This brings up the window for the 6-channel isolated analog output module
(1756-OF6CI; current output, or 1756-OF6VI; voltage output).

2. On the IOM Configuration window, select the Main tab and enter the

following parameters:

3. Select the Channel Configuration tab and enter the following parameters for

all channels:

4. Click OK.

Configuring digital input modules

To configure a digital input module:

1. Double-click the IOM with the name LabDI.

This brings up the window for the 16-channel, 24V DC isolated analog input
module (1756-IB16I).

in this field:

enter:

IOM Slot Number

the slot number containing this module

Remote I/O Chassis Mac Address

ControlNet Modulel Slot Number

in this field:

enter:

Shed to Safe Value

unchecked

Calibration Bias