Rockwell Automation 1792D-8BT8PE ArmorBlock MaXum 8 In/8 Out Module with Ground Lug - Manual

Publication 1792D-IN055A-EN-P - October 2004
Installation Instructions
ArmorBlock MaXum 8 Input / 8 Output Module
With Ground Lug
Cat. No. 1792D-8BT8PE
This ArmorBlock MaXum I/O module (Cat. No. 1792D-8BT8PE) is a
stand-alone 24V dc I/O product, which communicates via a
DeviceNet network. The sealed housing of this module requires no
enclosure.
This module has 8 inputs and 8 outputs accessed through Y splitter
cables. Inputs are 24V dc devices. Eight self-protected 24V dc outputs
can provide up to 0.5 amp each. Diagnostic features are short circuit,
open wire, and no load detection reported to the connector level on
inputs and point level on outputs. Local logic control has been
included. An external lug exists to ground the block.
43881
Ground lug