Cables – Rockwell Automation 1747-SCNR SLC ControlNet Scanner Module Installation Instructions User Manual
Page 12

12 SLC ControlNet Scanner Module
Publication 1747-IN059C-EN-P - September 2001
Cables
Several types of RG-6 quad-shield cables may be appropriate for
your ControlNet installation—depending on the environment factors
associated with your application and installation site.
The following Allen-Bradley ControlNet cable system components
are available from Rockwell Automation:
Important:
Install all wiring for your ControlNet system in
accordance with the regulations contained in NFPA 70
the National Electronic Code (or applicable country
codes), state codes, and applicable municipal codes.
For detailed information about ControlNet cabling, see the
ControlNet System Overview, publication CNET-SO001A-EN-P and
the publications listed in the table on the previous page.
Item
1
Cat. No.
ControlNet Coax Tool Kit - ControlNet Coax Tool (enables you to
make successful coaxial cables)
1786-CTK
Coax Tap Kit
Right-angle T-tap
Straight T-tap
Right-angle Y-tap
Straight Y-tap
1786-TPR
1786-TPS
1786-TPYR
1786-TPYS
Repeaters
Dual channel coaxial repeater 1786-RPCD
Fiber Optic Repeaters
Low-voltage dc coax adapter
1786-RPA
Short-range fiber module
1786-RPFS
Medium-range fiber module
1786-RPFM
RG-6 Quad Shield Cable
Standard-PVC CM-CL2
1786-RG6
ControlNet Network Access Cable–3.05 m (10 ft)
1786-CP
BNC Connectors
Barrel (plug to plug)
1786-BNCP
BNC/RG-6 plug
1786-BNC
Bullet (jack to jack)
1786-BNCJ
Isolated-bulkhead (jack to jack) 1786-BNCJI
Terminators (BNC-75
Ω)
1786-XT
1. For a complete list of Allen-Bradley ControlNet cable system components that are available from Rockwell
Automation and cable system components available from other suppliers, see the ControlNet Media
System Component List, publication AG-2.2.