Rockwell Automation 1502 400 Amp Medium Voltage Contactor (Series D) User Manual
Page 52
![background image](/manuals/579077/52/background.png)
6-2
Spare Parts
1502-UM050D-EN-P – June 2013
Table 6.A – Spare Parts
Part Number
Item
Description of Parts
120 V Control
400 A
1
Three (3) Vacuum Bottles X 80157
-496-52
2
Closing Coil (electrically held)
80153-576-51
3
Closing Coil (mechanical latch)
80154-134-51
4 Hol
d-in Coil
80153-575-51
5
Mechanical Latch Trip Coil (120 VAC)
80025-833-01
Elect. held, normal drop-out
80153-554-52
Elect. held, fast drop-out
80153-554-56
6
Auxiliary Assemblies
Mechanical latch
80153-999-60
7
Return Springs (standard altitude 0-1000 m) [ 80153
-567-01
8
Coil Retaining Ring
28325-042-01
9 Stop
Bracket
80153-565-01
10 Auxiliar
y Actuator Plate
80153-553-02
11
Armature Plate (electrically held)
80153-552-02
12
Armature Plate (mechanical latch)
80153-781-02
13
Mechanical Latch Roller Bearing
80153-748-01
14
Mechanical Latch Roller Bearing Shaft
80153-744-02
15
Mechanical Latch Roller Bearing Shaft Retaining Clip
M-5605
16
Mechanical Latch Auxiliary Contact Block
800T-XD2
Part Number
Item
Description of Parts
230 V Control
400 A
Closing Coil Z 80153
-576-52
Hold-in Coil Z 80153
-575-52
Auxiliary Assembly Z 80153
-554-59
X
Rockwell Automation recommends that if the contactor has been in service, all three (3) bottles be replaced
at the same time.
Y
The auxiliary assemblies include contact blocks, wire harness, female connector and mounting bracket.
Z
Only available for electrically held contactors.
Refer to Table 4.A for Return Spring part number for higher altitude contactors.