Rockwell Automation 1325L DC Motors, Frames C210ATZ - C440ATZ - Manual (Page 5)

DC Motors 5
Table A
Air Volume Chart
Power Supply
Check the motor nameplate to be sure the voltage and type of power
rating is the same as that of the power source.
A code stamped on the nameplate identifies the type of power supply
that must be used to supply armature power to the motor in order to
obtain the rated nameplate output. Since the code letter has been
selected in alphabetic order of increasing magnitude of ripple current,
a motor may be operated on a power supply having a letter
designation prior in the alphabet to the letter stamped on the
nameplate, with no loss in nameplate rating.
For example, a motor designed for a D type of power supply may be
used on a C power supply having the same voltage rating. The types
of power supplies are defined as follows.
Frame
Base Speed
RPM Air Volume
CFM Static Pressure
Inches of Water
C2113ATZ ALL 300 2.25
C2115ATZ ALL 290 4.1
C2512ATZ ALL 425 2.0
C2514ATZ ALL 385 3.4
C2515ATZ ALL 385 3.4
C2812ATZ ALL 550 3.25
C2813ATZ ALL 530 3.75
C2815ATZ ALL 530 3.75
C3210ATZ ALL 800 3.5
C3212ATZ ALL 800 3.5
C3214ATZ ALL 700 4.0
C3612ATZ ALL 1000 4.0
C3613ATZ ALL 950 5.1
C400ATZ ALL 1200 4.0
C440ATZ ALL 1650 7.0
!
ATTENTION: To guard against premature brush wear due
to silicone vapors, Do Not use silicone sealing compounds
in the vicinity of the motor or its air supply.