Rockwell Automation 1395 Reel Tension Paster Adapter - Manual (Page 7)

Publication 1395-RTP-5.1 - September 1997
Preface P-3
!
ATTENTION: This Drive system contains ESD
(electrostatic discharge) sensitive parts and assemblies.
Static control precautions are required when installing,
testing, or repairing this assembly. Component damage
can result if ESD control procedures are not followed.
If you are not familiar with static control procedures,
refer to Allen-Bradley publication 8000-4.5.2,
Guarding Against Electrostatic Damage or any other
applicable ESD protection handbook.
ATTENTION: Potentially fatal voltages may result
from improper usage of an oscilloscope and other test
equipment. The oscilloscope chassis may be at
potentially fatal voltage if not properly grounded. If an
oscilloscope is used to measure high voltage
waveforms, use only a dual channel oscilloscope in the
differential mode with X100 probes. It is recommended
that the oscilloscope be used in the A minus B
Quasi-differential mode with the oscilloscope chassis
correctly grounded to an earth ground. Refer to
equipment safety instructions for all test equipment
before using with the Drive.