Rockwell Automation 1397 115V AC Control Interface Card Inst. - Manual

Installation Instructions
IN
1397-5.18 March, 1997
Allen-Bradley
1397
115VAC Control Interface Card
Cat. No. 1397-L10
Table of Contents
What This Option Provides . . . . . . . . . . . . . . . . . . . . . . . . . 1
Where This Option Is Used . . . . . . . . . . . . . . . . . . . . . . . . . 1
What These Instructions Contain . . . . . . . . . . . . . . . . . . . . . 1
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Mounting Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
What This Option
Provides
Where This Option Is
Used
What These Instructions
Contain
The 115VAC Control Interface Card is a remote mounted option that
provides a means of interfacing signals and commands to the 1397
drive using 115VAC signals. A 115VAC power source must be
supplied by the user for the card to operate.
(12) 24VDC output terminals are provided on the card. A plug in DC
cable assembly included with the kit allows direct remote connection
to the Regulator Board terminal strip in the drive.
A plug in (14) input terminal strip is provided on the card to aid in
making field connections. Each of the 115VAC input terminals is
defined as either a command input signal or 115VAC.
T his option may be used with all 1397 drives.
These instructions contain the necessary information to install a 1397
115VAC Control Interface Card. For additional information on signal
requirements, wire recommendations and drive settings, refer to the
1397 User Manual — Publication 1397-5.0.