Rockwell Automation 1606-XLP60EQ Power Supply Reference Manual - Manual (Page 15)

All parameters are specified at 24V, 2.5A, 230Vac input, 25°C ambient and after a 5 minutes run-in time, unless noted otherwise.
Rockwell Automation Publication 1606-RM007A-EN-P - February 2014 15
Bulletin 1606 Switched Mode Power Supplies
Product certification information (including Certificates and Declarations of Conformity) can be found at www.ab.com/certifications .
18. Certifications
EN 60950-1,
EN 61204-3 Complies with CE EMC and CE Low Voltage Directives.
UL 508
IND. CONT. EQ.
LISTED E56639 for use in the U.S.A. (UL 508) and Canada
(C22.2 No. 14-95) Industrial Control Equipment
UL 60950-1
2
nd Edition
Recognized E168663 for use in the U.S.A. (UL 60950-1) and
Canada (C22.2 No. 60950) Information Technology Equipment,
Level 3
NEC Class 2 NEC
CLASS 2
Listed as Limited Power Source (LPS) in the UL report.
According to NEC (National Electrical Code) Article 725-41 (4).
GL (Germanischer Lloyd) classified
Environmental category: C, EMC1
Marine and offshore applications
See below for link to Certificate. Marine
GOST R GOST R certification is applicable for products intended for sale
and use within Russia. See below for link to Certificate.
19. Environmental Compliance
This unit does not release any silicone and is suitable for use in paint shops.
The unit conforms to the RoHS directive 2002/96/EC.
Electrolytic capacitors included in this unit do not use electrolytes such as Quaternary Ammonium Salt Systems.
Plastic housings and other molded plastic materials are free of halogens.
Production materials within our production does not include following toxic chemicals: Polychlorized Biphenyl (PCB),
Polychlorized Terphenyl (PCT), Pentachlorophenol (PCP), Polychlorinated naphthalene (PCN), Polybrom Biphenyll (PBB),
Polybrom Bipheny-oxyd (PBO), Polybrominated Diphenylether (PBDE), Polychlorinated Diphenylether (PCDE),
Polydibromphenyl Oxyd (PBDO), Cadmium, Asbest, Mercury, Silicia.