beautypg.com

Rockwell Automation 20G PowerFlex 750-Series Power Jumpers User Manual

Powerflex 750-series power jumpers, Installation instructions, Additional resources

background image

Installation Instructions

PowerFlex 750-Series Power Jumpers

PowerFlex 750-Series drives contain protective MOVs and Common Mode
Capacitors referenced to ground (see below). To guard against unstable operation
and/or damage, the drive must be properly configured as shown in

Table 1

or

Table 2

on

page 3

.

Additional Resources

These documents contain additional information concerning related products
from Rockwell Automation.

You can view or download publications at

http://www.rockwellautomation.com/literature/

. To order paper copies of

technical documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.

R/L1
S/L2

T/L3

PE-A1

PE-A

PE-A2

DC+

DC–

PE-B

MOV and AC EMI Capacitor Phase to Ground

Common Mode Capacitor to Ground

Frames 8…10

Resource

Description

PowerFlex 750-Series AC Drive Installation Instructions,

750-IN001

.

Provides the basic steps required to install a PowerFlex
750-Series AC drive.

Wiring and Grounding Guidelines for Pulse Width
Modulated (PWM) AC Drives, publication

DRIVES-IN001

.

Provides basic information needed to properly wire,
environmentally protect, and ground PWM AC drives.

Safety Guidelines for the Application, Installation and
Maintenance of Solid State Control, publication

SGI-1.1

.

Provides general guidelines for the application,
installation, and maintenance of solid-state control.

Guarding Against Electrostatic Damage, publication

8000-4.5.2

.

Provides practices for guarding against Electrostatic
damage (ESD).

Product Certifications website,

http://www.ab.com

.

Provides declarations of conformity, certificates, and other
certification details.

ATTENTION: The following information is merely a guide for proper
installation. Rockwell Automation cannot assume responsibility for the
compliance or the noncompliance to any code, national, local or otherwise for
the proper installation of this drive or associated equipment. A hazard of
personal injury and/or equipment damage exists if codes are ignored.

This manual is related to the following products: