beautypg.com

Rockwell Automation 150 SMC Flex Quick Start User Manual

Flex

background image

QUICK START

SMC

FLEX

BULLETIN 150

This guide provides you with the basic information required to start up your SMC Flex controller. When reading
this document, look for this symbol “Step x” to guide you through the four basic steps required to install, start-up,
and program the SMC Flex.

The information provided in this Quick Start guide does not replace the User Manual which can be ordered or
downloaded by visiting www.ab.com. The Quick Start guide assumes the installer is a qualified person with
previous experience and basic understanding of electrical terminology, configuration procedures, required
equipment, and safety precautions.

For safety of maintenance personnel as well as others who might be exposed to electrical hazards associated with
maintenance activities, follow all local safety related work practices (for example, the NFPA 70E, Part II in the
United States). Maintenance personnel must be trained in the safety practices, procedures, and requirements that
pertain to their respective job assignments.

For detailed SMC Flex information including set-up, programming, precautions, and application considerations,
refer to the following documentation.

For product technical support:

Title

Publication Number

Availability

SMC Flex User Manual

150-UM008*

www.ab.com/literature

SMC Flex Application Guide

150-AT002*

www.ab.com/literature

Online Support

www.ab.com/support

Telephone Support

440-646-5800 (option 2, option 4 or use
direct dial code 804)