Blodgett MT3255G - Manual (Page 2)

BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05402 • Phone: (802) 658-6600 • Fax: (802) 864-0183
MODEL MT3255G
SHORT FORM SPECIFICATIONS
Provide Blodgett Conveyor Oven model MT3255G conveyor oven. Unit shall be gas fired and shall cook by means of forced, heated air/impingement. Unit shall be (single/double/triple)
deck supported by (specify stand type from options list) . Each deck shall be fully independent, of stainless steel construction, and fully insulated on all sides. Provide with electronic
spark ignition gas fired baking compartment with three blowers to evenly distribute heat across baking zone. Conveyor belt shall be 32" (815mm) wide and constructed of stainless steel
wire mesh; baking zone length shall be 55" (1395mm). Unit shall be provided with stainless steel side loading door fitted with tempered glass view port. Front mounted control panel
shall be solid state with 600°F (315.5°C) maximum thermostat and digital display of adjustable belt speed. Provide start-up inspection service by a factory authorized service agent.
Provide options and accessories as indicated.
DIMENSIONS:
Floor space 62" (1575mm) W x 91" (2311mm) L
Product clearance 3.5" (90mm)
Combustible wall clearance 2" (50mm)
Belt width
Standard belt
32" (815mm)
Optional twin belt 16" (405mm) each
Baking zone length 55" (1395mm)
GAS SUPPLY: (specify) Natural Propane
Single 3/4" NPT 3/4" NPT
Double stack 1" NPT 3/4" NPT
Triple stack 1-1/4" NPT 1" NPT
MAXIMUM INPUT:
Single
125,000 BTU/hr
Double 250,000 BTU/hr
Triple 375,000 BTU/hr
Minimum Gas Pressure: 4.5" W.C. for natural gas
11.0" W.C. for propane gas
Maximum Gas Pressure: 10.5" W.C. for natural gas
13" W.C. for propane gas
POWER SUPPLY:
Domestic Model:
120/208-240 VAC, 1 Phase, 60 Hz., 7 amp, 3 wire with
Ground
Export Model:
220-240, 1 phase, 50 Hz., 7 amp, 2 wire with Ground
MINIMUM ENTRY CLEARANCE:
Uncrated 24.2" (615mm)
Crated 32" (813mm)
SHIPPING INFORMATION:
Approx. Weight: Crated Uncrated
Single 1120 lbs. (510 kg) 1021 lbs. (463 kg)
Double 2930 lbs. (1060 kg) 2042 lbs. (926 kg)
Triple 3600 lbs. (1640 kg) 3063 lbs. (1389 kg)
Crate sizes:
32" (813mm) x 70" ( 1778mm) x 105" (2667mm)
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitu-
tions of components without prior notice
TOP VIEW
*58” (1473mm) without false front
91” (2310mm)
55” (1395mm) 18”
(455mm)
GAS
INPUT
32”
(815mm)
61”*
(1550mm)
END VIEW
3.5” (90mm)
PRODUCT CLEARANCE
3/4” NPT
GAS INPUT
48” (1219mm)
or 36” (914mm)
flexible gas hose available
SIDE VIEW
0” (0mm)
23.5” (595mm)
36.5” (925mm)
47.7” (1210mm)
0” (0mm)
17.5” (445mm)
SIDE VIEW
30.5” (775mm)
41.7” (1060mm)
54.5” (1385mm)
66” (1675mm)
SIDE VIEW
0” (0mm)
1.7” (45mm)
14.7” (375mm)
26” (660mm)
39” (990mm)
50” (1275mm)
63” (1600mm)
74.3” (1885mm
APPROVAL/STAMP
P/N M9993 Rev F (6/01)