Rockwell Automation 1336S_F_T_E_R C-Frame Front End Conversion Kit - Manual

Instructions
1336 PLUS, PLUS II , IMPACT, and FORCE
C-Frame Front End Conversion Kit
About This Publication This publication will guide you through installation of the C-Frame
Conversion Kit for the following drives:
Important: This Front-End Conversion Kit is used to service C-frame
drives that require replacement of 1336-SN-SP1A,
1336-SN-SP1B, or 1336-SN-SP2A Snubber Boards and/or
1336-BR-SP5A or 1336-BR-SP6A Bridge Rectifiers which are
all obsolete.
Important: The Snubber Board in this Conversion Kit: 1336-SN-SP1C
(460V) or 1336-SN-SP2B (575V) and the Bridge Rectifier in
this Conversion Kit: 1336-BR-SP10A (460V and 575V) are not
backwards-compatible with the components listed in the above
paragraph.
Each Conversion Kit consists of the following components:
•
Complete C-Frame drive, less the components listed below.
•
Bus Inductor and bus fuse for either BX060 (1) or CX060 (2) .
•
1/4 turn screws (qty 2) for the Snubber Board.
•
IGBT shorting devices (qty 2) for the J7 and J8 connectors.
•
A label to mount next to the nameplate of the converted drive.
The Conversion Kit does not include the following:
•
Main Control Board, mounting plate, or option cards.
•
Gate Driver Board.
•
Precharge Board and mounting brackets.
•
Drive enclosure and mounting hardware, etc.
Drive Kit Catalog Part Number
1336S, F, E or T -BX040
1336S, F, E or T -B040
1336S, F, E or T -B050
1336S, F, E or T -BX060 1336-CONVCF-SP1A
1336-CONVCF-SP1A
1336-CONVCF-SP1A
1336-CONVCF-SP1A
(1)
1336S, F, E or T -C025
1336S, F, E or T -C030
1336S, F, E or T -C040
1336S, F, E or T -C050
1336S, F, E or T -CX060 1336-CONVCF-SP2A
1336-CONVCF-SP2A
1336-CONVCF-SP2A
1336-CONVCF-SP2A
1336-CONVCF-SP2A
(2)
(1) The Bus Inductor and bus fuse supplied in the CONVCF-SP1A Kit can be used on all C-frame drives (460V).
(2) The Bus Inductor and bus fuse supplied in the CONVCF-SP2A Kit can be used on all C-frame drives (575V).