Rockwell Automation 20P PowerFlex DC Drive - Frame A SCR Modules for Drive w/Power Traces Circuit Board - Manual

Installation Instructions
PowerFlex
®
DC Drive - Frame A SCR Modules
for Drives with a Power Traces Circuit Board
What This Kit Includes
•
SCR modules (3 for non-regenerative drives, 6 for regenerative drives)
•
Mounting screws and washers (6 for non-regenerative drives, 12 for
regenerative drives)
•
Gate leads (6 for non-regenerative drives, 12 for regenerative drives)
•
Thermal Grease
•
Static strap
Important: The SCR Modules supplied with this kit should only be used in
the following Frame A drives:
!
ATTENTION: Only qualified personnel familiar with DC
drives and associated machinery should plan or implement the
installation, start-up and subsequent maintenance of the system.
Failure to comply may result in personal injury and/or equipment
damage.
!
ATTENTION: To avoid an electric shock hazard, ensure that all
power to the drive has been removed before performing the
following.
!
ATTENTION: This drive contains ESD (Electrostatic
Discharge) sensitive parts and assemblies. Static control
precautions are required when installing, testing, servicing or
repairing this assembly. Component damage may result if ESD
control procedures are not followed. If you are not familiar with
static control procedures, reference A-B publication 8000-4.5.2,
“Guarding Against Electrostatic Damage” or any other
applicable ESD protection handbook.
230V AC Input 460V AC Input
Drive Current
Rating Code
DC Amps
AC Line
Amps
HP
Drive Current
Rating Code
DC Amps
AC Line
Amps
HP
7P0 7 5.7 1.5 4P1 4.1 3.3 2
9P0 9 7.4 2 6P0 6 4.9 3
012 12 9.8 3 010 10 8.2 5
020 20 16 5 014 14 11.4 7.5
029 29 24 7.5 019 19 15.5 10
038 38 31 10 027 27 22.1 15
055 55 45 15 035 35 28.6 20
045 45 36.8 25
052 52 42.5 30