beautypg.com

Step 4: remove the feedback option board, Remove – Rockwell Automation 20D Stegmann Feedback Option Board for PowerFlex 700S Drives User Manual

Page 9

background image

Stegmann Feedback Option Board for PowerFlex® 700S Drives

9

Remove the Cassette Covers on Drives with Phase II Control (All Drive Sizes)

Step 4: Remove the
Feedback Option Board

Task Description

Loosen the screws on the face of the front cover and remove the cover.

Loosen the screws on the side of the rear cover and remove the cover.

A

B

A

B

=

Proper tightening torque
for reassembly is 6 lb.•in.

Task

Description
Remove the screws that secure the feedback option board to the control assembly.

Remove the feedback option board and through-board pin connectors from the main
control board.
Remove the standoffs from the main control board (drives with Phase I control only).

A

B

C

B

Note: Phase I shown.

A

C

=

TIP: Use packing material from new Stegmann Feedback option board to
return the replaced Stegmann Feedback option board.