Afinia H479 3D - Manual (Page 23)

Afinia H-Series 3D Printer User’s Manual
23
Print Setup Options
Click the Setup option in the 3D Print menu or the Preferences button on the Print and Print
Preview windows. The following dialog box will appear:
Print Settings
Z Resolution
This setting specifies the print resolution or layer thickness of the printer. Options are
0.15mm to
0.40mm per layer, in 0.05mm increments, with the most current Printer ROM version applied.
Part Settings
Angle
The Part Angle sets the horizontal printing orientation for fill printing. Set at
45 Deg , the part will
be filled in with material printed at 45 degrees to the X- and Y-axes. Changing the value will
change the print angle to that selected, with the angle of each layer still being printed
perpendicular to the one below.
The orientation of the part itself will not be changed, just the angle at which the fill material is
printed. This setting will also not change how the perimeter of the model is printed.
Surface
This setting determines how many layers form the bottom face of a part when it is not solid. For
example, if you set it to
3 , the machine will print 3 complete layers before going into non-solid
mode.
This does not affect the side wall thickness on non-solid parts, which are all the same thickness
(approximately 1.5mm) regardless of the fill mode.
Mac version
Windows version