Yamato Scientific RE500 Evaporators, Rotary - Manual (Page 20)

18
Installation/Assembly
Lift for RE400/500
16. Manual lift (Supplemental function of RE400/500)
Adjust the lift by using the 2 knobs (big and small) located on the right side of the unit.
1. Loosen the small knob. →Picture 1
2. Turn and keep the big knob to “Release”, and you can freely move the lift up and down.
3. After you determine the position, return the big knob to the original position “Lock” and you can fix
the height. →Picture 2,3
4. After you determine the lowest position, fasten the small knob. →Picture 4,5
The lift will not go lower than the fixed position. However, this function effectively works only when
the small knob is positioned within 5.3 inches ( 135 mm ) from the bottom.
(Picture 1) (Picture 2) (Picture 3)
(Picture 4) (Picture 5)