Yamato Scientific IQ821 Low Temperature Incubators - Manual (Page 8)

4
Before Using this unit
Requirements for Installation
WARNING!
1. Always ground this unit
• Be sure to connect the earth wire (the green cable of power cord) to the grounding conductor
or ground terminal to prevent accidents caused by electric leakage.
• Please consult your local electrical contractor for power connecting work.
• Do not connect the earth wire to gas or water pipes. If not, fire disaster may be caused.
• Do not connect the earth wire to the ground for telephone wire or lightning conductor. If not,
fire disaster or electric shock may be caused.
™ The power plug is not equipped with this
unit. Connect the ground wire correctly
adjusting to the status of the power supply
equipment side to be connected.
2. Connect the power cord paying attention to the color of each core wire
• When connecting the power cord, do check the breaker
on the electric power equipment be "OFF". Note that
IQ821 does not equip with the power plug. Select and
connect the appropriate plug or terminal corresponding
to the power capacity that is adjusted to the status of
the power supply equipment side. Core Wire Color Interior Wiring
Black Power Supply Side
White Power Supply Side
Green Ground Wire Side
3. Choose a proper place for installation 4. Caution at defrost
• Catch drain from drain hose with a tray
at defrost.
• Do not install this unit in a place where:
♦ Rough or dirty surface.
♦ Flammable gas or corrosive gas is
generated.
♦ Ambient temperature exceeds 35°C.
♦ Ambient temperature fluctuates violently.
♦ There is direct sunlight.
♦ There is excessive humidity and dust.
♦ There is a constant vibration.
• Install this unit on a stable place with the
space as shown below.
Main Unit
More than
15cm
More than
15cm
More than 15cm
Front side
Note: The tray is not included in the attachments of
unit.
Rounded terminal
for M5
Green (to ground)
Black (to power supply)
White (to power supply)
Drain hose
Tray