beautypg.com

Description and function of each part, Control panel – Yamato Scientific IQ821 Low Temperature Incubators User Manual

Page 14

background image

10

Description and Function of Each Part

Control Panel

No. Name

Function

① START/STOP

Key:

Starts/stops the operation.

▲▼ Key:

Uses for rising UP/lowering DOWN the setting value.

③ ENTER

Key:

Settles the inputted value.

④ FIXED

TEMP

Key:

Chooses the fixed temperature operation.

⑤ TIMER

Key:

Chooses the timer operation (Quick Auto Stop/Auto Stop/Auto

Start).

⑥ PROGRAM

Key:

Chooses the program operation or program creation mode.

⑦ SUBMENU

Key:

Uses for setting the overheating prevention temperature,
calibration offset temperature, key lock function, or program

repeat function.

⑧ HEATER

Lamp:

Lights while the heater works.

⑨ ALARM

Lamp:

Lights up when an error occurs. (Buzzer sounds simultaneously.)

AUTO STOP Lamp:

Blinks while setting quick auto stop timer or auto stop timer.
Lights while quick auto stop timer or auto stop timer is running.

AUTO START Lamp:

Blinks while setting auto start timer.

Lights while auto start timer is running.

⑫ FIXED

TEMP

Lamp:

Blinks while setting fixed temperature operation.
Lights while fixed temperature operation is running.

⑬ PROGRAM

Lamp:

Blinks while setting program operation.
Lights while program operation is running.

Measurement Temperature
Display:

Displays the measured temperature, setting character, alarm

information.

Setting Temperature
Display:

Displays the setting temperature, setting value for timer mode,
remaining time.

Overheating Prevention
Temperature Display:

Displays the setting temperature for overheating prevention
device.

⑰ Refrigerator

Lamp:

Lights while the refrigerator works.