Yamato Scientific DVS602 Constant Temperature Drying Oven - Manual (Page 14)

12
3. Names and functions of parts
Explanation of characters
Characters Identifier Name Application
cAL Calibration offset setting
Used for inputting a calibration offset
temperature
See section “Using the calibration
offset function” on page 31.
oH
Setting overheat
protection device
temperature
Used for setting an overheat
protection device temperature.
See section “
Settings for overheat
prevention device” on page 16.
Lock Key lock of settings
Key locks settings to prevent their
alteration
See section ”Using the lock function”
on page 32.
* See the section “Operation mode・function setting keys and characters” on page 15 for
characters of operation modes and functions
.