Wood’s Powr-Grip EL Series - Manual (Page 4)

Rev 0.2/12-12 2 ELWC, etc: #35003
WARNINGS
Powr-Grip is pleased to offer the most reliable materials handling products
available. Despite the high degree of security provided by the Eazi Lifter,
certain precautions must be observed to protect the operator and others.
Always wear personal protective equipment that is appropriate for the material being handled.
Follow trade association guidelines.
Always operate the Eazi Lifter under conditions approved for its design (see INTENDED USE:
O
PERATING
E
NVIRONMENT
).
Never operate an Eazi Lifter that is damaged, malfunctioning, or missing parts.
Never remove or obscure warning labels.
Never operate an Eazi Lifter if the Serial Tag with Maximum Load Capacity or any warning
appears to be missing or obscured.
Never exceed the Maximum Load Capacity or attempt to lift loads the Eazi Lifter is not designed
for (see INTENDED USE: L
OAD
C
HARACTERISTICS
).
Never allow people to sit or stand on any components of the Eazi Lifter, or the load being lifted.
Never lift a load higher than necessary or leave suspended loads unattended.
Never lift a load over people.
Always secure the quick links and any other relevant connection device before lifting a load (see
OPERATION: T
O
A
TTACH A
L
OAD TO THE
E
AZI
L
IFTER
).
Always keep other personnel far enough away from the Eazi Lifter to avoid injury in the event of
an unexpected load release.
Always remember that modifications to the Eazi Lifter may compromise its safety. Wood’s
Powr-Grip cannot be responsible for the safety of an Eazi Lifter that has been modified by the
customer. For consultation, contact Wood's Powr-Grip (see LIMITED WARRANTY).
Never use the Eazi Lifter near power transmission lines.
Always maintain control of the load at all times using hand cups, slings, or other appropriate
means.