Wood’s Powr-Grip EL Series User Manual
Page 17

Rev 0.2/12-12
15
ELWC, etc: #35003
A
FTER
U
SING THE
E
AZI
L
IFTER
If there is a load or attachment devices connected to the Eazi Lifter, first remove them, and then
fully wind the lifting rope until the boom is retracted. Next, secure the boom in place using the
boom latch. Carefully remove the Eazi Lifter from the building by loosening the threaded
adjustment collar and setting the lifter on the floor. Disassemble the main support post by
removing the cotterless hitch pins. The Eazi Lifter is now ready for storage.
If the Eazi Lifter is transported to another location, use the original shipping container and secure
the lifter so as to protect the components from damage while in transit.
Storing the Eazi Lifter
Store the Eazi Lifter in a dry location and cover it to prevent soil, water or other contaminants
from damaging the lifting rope or other components. Store hand cups in their protective cases.
!!-CE-!! In accordance with CE Standard EN 13155, the Eazi Lifter is designed to rest on
relatively horizontal surfaces without tipping over. To store the lifter in this way, lay the lifter
down on a clean, smooth, flat surface.