Wood’s Powr-Grip EL Series - Manual (Page 13)

Rev 0.2/12-12 11 ELWC, etc: #35003
OPERATION
B
EFORE
U
SING THE
E
AZI
L
IFTER
The operator must determine whether the Eazi Lifter is capable of performing each intended
task, in accordance with the SPECIFICATIONS and INTENDED USE sections of this
INSTRUCTIONS manual. In addition, the following preparations must be completed prior to
using the Eazi Lifter.
Taking Safety Precautions
The operator must be trained in all relevant industry and regulatory standards for the operation
of the Eazi Lifter in its geographical location.
The operator must read and understand this
INSTRUCTIONS manual, including all WARNINGS ,
before using the Eazi Lifter. If necessary, contact Wood’s Powr-Grip or an authorized dealer for
assistance.
WARNING: Always wear appropriate personal protective equipment.
The operator must wear any personal protective equipment and take any other precautions
required to handle the load safely. Consult appropriate trade association guidelines to determine
what precautions are necessary for each type of load material.
Performing Inspections and Tests
Perform all inspections and tests required by the I
NSPECTION
and T
ESTING
S
CHEDULES
(see
MAINTENANCE). In addition, if the Eazi Lifter has been in storage, always conduct a V
ACUUM
T
EST
before placing it in service (see MAINTENANCE).
T
O
A
TTACH A
L
OAD TO THE
E
AZI
L
IFTER
Before the operator attaches a load to the Eazi Lifter, the load must be located directly beneath
the boom. A good way to determine whether the load is centered under the boom is to winch
the lifting rope thimble up or down with the hand winch, so that the thimble hangs freely at a
height just above the load. Move the load so that it’s clearly centered beneath the lifting rope.
Never use the Eazi Lifter to pull or drag the load sideways, even if the distance seems
insignificant.
WARNING: Never use Eazi Lifter to pull or drag load sideways.
When using hand cups to lift the load, make sure both the load surface and the faces of vacuum
pads are clean and free of debris (see MAINTENANCE: V
ACUUM
P
AD
M
AINTENANCE
). The position of
the vacuum pads on the window or load is important to ensure the stability of the load, to avoid
overloading the hand cups, and to ensure that the Eazi Lifter boom will retract appropriately to
draw the window or load into final position. Following are some requirements and guidelines to
assist in positioning the hand cups on the load.