Western Digital My Book Studio/Studio LX User Manual - Manual (Page 55)

MY BOOK STUDIO AND STUDIO LX
USER MANUAL
USING THE DRIVE WITH WINDOWS – 50
Installing on Windows XP Computers
To install your My Book Studio or Studio LX drive on a Windows XP computer:
1. After physically connecting the drive as shown in Figure 4 on page 8, click Cancel to
close the Found New Hardware Wizard:
Note: WD SmartWare will install the driver for this drive.
2. One or two screens might appear, depending on your computer setup:
3. AutoRun (AutoPlay) enabled—The Welcome to WD SmartWare screen displays:
If a flash video player is installed on your computer, the screen is animated.
4. Disregard the rest of this procedure and continue to “Getting Started with the
WD SmartWare Software on Windows” on page 54.
Note: If you do not want to install the WD SmartWare software, go to “Getting
Started Without the WD SmartWare Software” on page 60 instead.
IF AutoRun (AutoPlay) is . . . on your computer, THEN . . .
Enabled Proceed to step 3.
Disabled Skip to step 5.