Weidmuller GPRS Alarm Unit User Manual
Ie-gprs-i/o
Table of contents
Document Outline
- 1 Safety Notes 1-4
- 1.1 Graduated safety notes 1-4
- 1.2 Definitions 1-4
- 1.3 Hazards resulting from use other than as described 1-5
- 1.4 Hazards resulting from modifications and upgrades 1-5
- 1.5 Admitted personnel 1-5
- 1.5.1 Operator 1-6
- 1.5.2 Start-up engineer 1-6
- 1.5.3 Service engineer 1-6
- 1.6 Electrical connections 1-7
- 1.7 Safety regulations 1-7
- 1.8 Service and maintenance 1-8
- 1.9 Waste disposal 1-8
- 1.10 Liability 1-9
- 2 Use as Prescribed 2-10
- 2.1 Range of application 2-10
- 3 Description of Functions 3-12
- 3.1 General Description of Functions 3-12
- 3.2 Functions of the interfaces 3-13
- 3.2.1 Digital inputs 3-13
- 3.2.2 Analog inputs 3-14
- 3.2.3 Digital outputs 3-15
- 3.2.4 Serial interface 3-16
- 3.2.5 Operating modes of the serial interface 3-16
- 3.2.6 GSM modem 3-17
- 3.2.7 SIM card 3-17
- 3.2.8 GSM services 3-17
- 3.3 Settings of the operating system 3-18
- 3.3.1 (Firmware) update for the operating system 3-18
- 3.3.2 Resetting to the factory defaults 3-20
- 3.4 Communication between PC and IE-GPRS-IO 3-21
- 3.4.1 Diagnosis using a terminal program 3-22
- 3.4.2 Remote servicing 3-24
- 3.4.3 The "Passive" mode 3-25
- 3.4.4 The "Transparent" mode 3-25
- 4 Configuring the IE-GPRS-IO 4-26
- 4.1 Configuring the via the RS 232 interface 4-26
- 4.1.1 Setting up the virtual modem and the long-distance data transmission connection under Windows XP/2000 4-26
- 4.1.2 Installing the long-distance data transmission connection 4-29
- 4.2 Making the settings 4-38
- 4.2.1 General Settings 4-40
- 4.3 Access to the device 4-42
- 4.3.1 Device Access 4-42
- 4.4 Digital inputs and outputs (Digital I/O) 4-45
- 4.5 Analog inputs ("Analog I") 4-47
- 4.6 Alarm Message 4-50
- 4.7 Message Services 4-53
- 4.8 ISP settings for the Internet access 4-57
- 4.9 Function control 4-60
- 4.10 Server 4-62
- 4.11 COM port 4-64
- 4.12 Logbook 4-65
- 4.13 Cost control 4-66
- 4.14 Troubleshooting 4-68
- 4.15 Systemtime 4-68
- 4.16 About 4-69
- 5 Hardware 5-70
- 5.1 Installation 5-70
- 5.1.1 Dimensions 5-70
- 5.1.2 Installing the top-hat rail 5-71
- 5.1.3 Wall mounting 5-72
- 5.2 Installation notes 5-74
- 5.2.1 Functional earthing 5-74
- 5.3 Installation guidelines 5-75
- 5.4 Storage and storage temperatures 5-75
- 5.5 Operating temperature, humidity 5-75
- 5.6 Status display 5-76
- 5.6.1 Display "POWER on/off" 5-77
- 5.6.2 "Status" display 5-77
- 5.6.3 "Line" display 5-77
- 5.6.4 "Ports" display 5-78
- 5.7 Connections / interfaces 5-79
- 5.7.1 Power supply 5-79
- 5.7.2 RS232 5-80
- 5.7.3 Inserting the SIM card 5-80
- 6 Technical Data 6-84
- 7 Standards and Certifications 7-86
- 7.1 Harmonised standards 7-86
- 7.2 Certification to DIN EN ISO 9001 7-86
- 7.3 Approbations 7-86
- 7.4 CE marking 7-86
- 8 Symbols Used 8-87
- 9 Glossary 9-88
- 1 Safety Notes
- 2 Use as Prescribed
- 3 Description of Functions
- 4 Configuring the IE-GPRS-IO
- 5 Hardware
- 6 Technical Data
- 1
- 7 Standards and Certifications
- 8 Symbols Used
- 1
- 9 Glossary
- 1