Weidmuller GPRS Alarm Unit - Manual (Page 54)

Configuration
4-52
▫ The message targets form a message sequence.
The message sequence is interrupted if a target of this sequence
was informed successfully, including acknowledgement.
▫ If a message target is to be informed in any case, irrespective of
its position in the message sequence, the message targets must
be marked additionally with "ALW".
- Example: Shift schedule in a sequence of 3 and additionally a
fax to the exchange centre, which is always to be sent. -
▫ Message targets that are marked with an "I" have no influence on
the message sequence, i.e. even if such a message target was
informed successfully, the message sequence is not quit.
Weekday
• The relevant message is only sent on the marked days of the week;
thus, a simple shift schedule can be realised.
from - to
• The message is sent during the time "from - to".
• If the time period passes midnight, the message is still sent even if
the second day of the week is not marked,
for example, from = 07:00 p.m. to = 08:00 a.m. Mon
Tue
is marked.
If the input is now triggered on Wednesday at 07:50 a.m., the
message is sent even though Wed is not marked.
Switch if
• Here you can specify that one of the digital outputs can be
switched:
▫ If no message target was informed successfully.
▫ If one message target was informed successfully.
▫ If all message targets were informed successfully.
▫ Message targets marked with "ALW" are ignored.
Save your settings before switching to a different input!
NOTE