Weidmuller GPRS Alarm Unit - Manual (Page 52)

Configuration
4-50
4.6 Alarm Message
Input
• The following events can be selected to trigger a message:
REPORT
An error has occurred, e.g. faulty
login into the GPRS network
DI1 ... DI4 Digital inputs 1 to 8
AI1 … AI2 Analog inputs 1 and 4
EI1 … EI16 Signal inputs, serial, via the TUP protocol
Text
• Enter the text you wish to be displayed in the message in the text
field, for example "Fault: Pump".
• The maximum length permitted, including all text blocks, is 160
characters.
• Longer texts will be truncated.
• The following text blocks can be used to create a message text
dynamically:
▫ #HEAD# Inserts the header (menu option "General").
▫ #DATE# Inserts the sending date of the message.
▫ #TIME# Inserts the sending time of the message.