UVP HEPA/UV PCR Systems - Manual (Page 12)

HEPA/UV3 PCR Workstation and Cabinet Page 12
Maintenance, Replacement Parts/Accessories
and Technical Assistance
Replacement Parts and Accessories
Replacement parts are listed below. Only authorized UVP service personnel should perform repairs or
replacements other than specified in these procedures.
Replacement Parts Part Number
Pre-filter 38-0314-01
Carbon-filter 76-0352-01
HEPA filter 17-0113-01
Shelf, small 8.8”W (for cabinets) 20-1209-01
Shelf, large 13”W (for workstations) 20-0970-02
Fuse (2 required) 56-0049-01
Makrolon
®
Panels
Side Panels (2 Required) 10-0618-01
Upper Door Panel (Workstation)
10-0619-01
Lower Door Panel (Workstation) 10-0620-01
Upper Door Panel (Cabinet)
10-0621-01
Lower Door Panel (Cabinet) 10-0622-01
Replacement Tubes
System/Part Number Replacement Tube Tube Description Qty.
UV3 HEPA PCR Cabinet 34-0007-01 8 Watt 254nm UV 6
95-0434-xx 34-0056-01 8 Watt White 2
UV3 HEPA PCR Workstation 34-0007-01 8 Watt 254nm UV 2
95-0438-XX 34-0056-01 8 Watt White 2
34-0073-01 25 Watt 254nm UV 2
Accessories
Part Number
Table, stainless steel top 98-0077-01
UVX Radiometer 97-0015-02
UVX Sensor (UVX-25) 97-0016-01
J-225 Meter 97-0004-01
Spectacles, UV blocking (UVC-303) 98-0002-01
Goggles, UV blocking (UVC-503) 98-0002-02
Face Shield, UV blocking (UVC-803) 98-0002-04
Replacing the Filters
Recommended filter replacement schedule to maintain optimum filter performance:
HEPA filter: Every 6 months or when significant drop in airflow is observed
Carbon filter: Once a year
Pre-filter: Once a year
PCR Table