UVP BioDoc-It System - Manual (Page 13)

BioDoc-It Imaging System 13
Saving Tab
NOTE: If the auto save function is enabled, the image will automatically save when the SNAP button is
pressed. If the auto save function is not enabled, press the SAVE button to save an image. A pop up
screen will allow the user to save to the USB Drive or a different location with Prompt for Location
function.
Save Images To: Select the location where images are to be saved. White highlight indicates which
button is activated. The USB DRIVE will save the file to the USB drive if one is plugged in. If one is not
plugged in, the user will be prompted to select a different location. PROMPT FOR LOCATION will ask
the user to select a location when the SAVE button is pressed.
Save Format: Click the down arrow to select the file format. Save images as TIFF (16-bit), JPEG (8-bit)
or GIF (8-bit) file formats.
Auto Save To: Click the white box to active the auto save function. To change the folder to a different
location, click in the folder field and a “Browse for Folder” window will pop up. Select a folder or make a
new folder. Click OK to close the window. The selected folder will display in the auto save to box.
Auto Print: Select from Never, Always, or After Save
NOTE: These options will be reflected after capturing an image with the SNAP button, and not in LIVE
mode.
Touch the OK button to save all preferences and go back to the main screen, or the Cancel button to go
back to the main screen without saving changes.