Unisteer 8001020-02 S10 Rack & Pinion 1996-2004 - Manual (Page 2)

pg. 2 655590
KIT CONTENTS:
# Part Number Description Quantity
1a 8000980-01 Rack And Pinion Assembly (Only in 8000990-01) 1
1b 8001030-01 Rack And Pinion Assembly (Only in 8001020-01) 1
2 8021810 Steering Shaft Support Bracket 1
3 8051270 Steering Shaft Assembly 1
4 600500 Zip Ties 2
5 120410 Lock Nut, 7/16” 4
6 200920 Split Lock Washer, 7/16” 2
7 231420 Bolt, 7/16”-14 x 1 ¼” 2
8 200860 Flat Washer, 7/16” 6
9 231430 Bolt, 7/16”-14 x 5” 2
Disassembly
1. Before starting, center and lock steering wheel in place. In order to perform this installation, the front of
the vehicle must be off the ground. A lift works best, however jack stands will work. There are no special
tools required.
2. Remove pinch-bolt from steering-shaft to steering box and separate shaft from steering box.