Unisteer 8001020-02 S10 Rack & Pinion 1996-2004 - Manual (Page 11)

pg. 11 655590
14. U-joint Mis-Phasing: (To provide proper turn, U-joints will need to be 90 degrees opposite of each other)
15. Reinstall and torque hardware previously removed or loosened on steering column.
16. Reinstall trim panel inside the vehicle.
Once installation is complete, note the position of the front tires making sure that they are somewhat
straight and steering wheel is centered. It will be necessary to have your vehicle aligned by a
professional to re-adjust toe spec.
If you have any questions or problems regarding this product please contact:
UNISTEER
Performance Products
1555 Enterprise Parkway
Twinsburg OH 44087
800-338-9080
WWW.UNISTEER.COM
Last Updated 6/13/2014
Copyright © 2009 by Maval Manufacturing Corporation All rights reserved.
No part of these materials can be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying, recording or by any information storage and retrieval system,
without permission in writing from Maval Manufacturing Corporation.