Titus Alpha BAC-8001/BAC-8201 Cooling Only - Manual (Page 12)

BAC-8001 and BAC-8201 VAV Controllers Installing the controllers
Connecting outputs
12
Connecting
outputs
The BAC-8001 and BAC-8201 controllers have two preconfigured outputs to
support the supplied programs. The outputs are programmed run the integrated
actuator in either a clockwise or counterclockwise direction. No external output
connections are available.
Connecting to
sensors
Connect any of the following sensors to the RJ-45 thermostat and sensor jack.
STE-8001
STE-8201
STE-6010
STE-6014
STE-6017
Link the controller to sensors with standard straight-through Ethernet cables up
to 75 feet long. See the installation guide supplied with the sensors for complete
sensor installation instructions.
No programming or configuration is required for the supported sensors. The
controller is configured to automatically detect which type of sensor is
connected to it.
Table 2-2 BAC-8001 and BAC-8201output objects
Object Function Name
False
value
True value
Default
value
Type
BO1 Damper Clockwise DAMPER CW Neutral Clockwise Neutral Internal
BO2 Damper Counter
Clockwise
DAMPER CCW Neutral Counterclockwise Neutral Internal
Illustration 2-4 Connecting to a sensor
Maximum 75 feet v
Sensor jack